Description
The Carmy CM-233 Neoprene Adhesive is a two-component, cold-weld Adhesive for Hypalon Neopren fabrics.
It has been developed for bonding Neoprene-Hypalon inflatable boats and diving suits, with the addition of hardener 8%, that increases bonding strength and heat resistance.
It is also Suitable for bonding leather, EVA, natural rubber soles to leather, or fabric uppers.
Application Instructions:
Treat the surfaces with sandpaper and thoroughly clean with acetone, or MEK.
Mix glue with Desmodur RC, or RFE catalyst in a ratio of 8-10% .
Apply with a brush a thin coat on the surfaces, to be bonded without touching each other.
Wait for 4 to 12 hours for the glue to set and then spread another layer on.
Wait for about 10 minutes for the solvents to evaporate and then join the parts.
Immediately after, press thoroughly and apply constant pressure for at least 12 hours.
Technical Characteristics
Yellowing resistant in UV radiation.
Also Suitable for bonding leather, EVA, natural rubber soles to leather, or fabric uppers.
Suitable for Hypalon Neopren and rubber accessories.
No heating is required for its process and curing.
Dries with the addition of the Desmodur catalyst.
The curing process is completed within 48 hours.
Pot Life: 15 20 minutes after mixing
Reviews
There are no reviews yet.