Description
The CM-888 is a two-component, warm welding adhesive, for PVC fabrics, inflatable boats and accessories.
Its application requires heating. The CM-888 is a glue developed for PVC inflatable boats and accessories.
Do dry out it requires the addition of Desmodur hardener / catalyst at a ratio of 8-10%.
It is available in 1 Lt tins.
Application Instructions:
Treat the surfaces with sandpaper and thoroughly clean with acetone
Mix the CM-888 glue with Desmodur RC, or RFE catalyst at a ratio of 8% – 10% and spread a thin coat on the surfaces to be bonded, without putting them in contact.
Wait between 4 and 12 hours for the glue to dry out completely, so you do not feel it to the touch
Spread another layer on the PVC materials
Wait for 15 to 20 minutes for the solvents to evaporate
Expose one, or both surfaces to a source of heat, with a hot air gun to activate the chemical reaction
Put the parts in touch and if possible add and maintain pressure to them for 24 hours.
Complete cure is accomplished between 24 and 48 hours.
Pot Life: 15 – 20 minutes after mixing
Reviews
There are no reviews yet.