Description
FORWARD WIP FOIL FIX M6 35MM
Innovative solution to mount a foil on board in 30 seconds.
4x M8 or M6 strainless threaded rods are premounted on the board using existing T nuts, gently pushing on the bottom of the foil box, maintaining the right longitudinal position of the foil on the board.
Then all you have to do is place the foil on 4 axes and hold it in place by screwing on the Foil Fix nuts by hand.
You can then go and foil 20s later!
The shape of our nuts are designed to allow lowest hydro drag before taking off!
An extra small power tool is supplied to apply more tension if needed, or facilitate the uncrewing of the nuts after your session.
Innovative solution to mount a foil on the board in 30 seconds.
4 M8 or M6 stainless steel threaded rods are pre-mounted in the board using existing T-nuts, pushing gently into the bottom of the foil box, maintaining the correct longitudinal position of the foil in the board.
Then, all you have to do is place the foil on the 4 shafts and fasten it in place by screwing the Foil Fix nuts by hand.
You can go foiling 20 seconds later!
The shape of our nuts is designed to allow the least hydrodynamic resistance before take-off.
An additional small power tool is supplied to apply more tension if needed or to facilitate unscrewing the nuts after your session.
Reviews
There are no reviews yet.